IS420UCSBH3A controller module Mark VIe series-controller in stock.

IS420UCSBH3A controller is a version of General Electric (GE)Mark VIe series UCSB controller, which is mainly used in the management system and control system of automatic drive components of gas, steam and wind turbines. This series of controllers is a significant improvement of Mark V series, especially in functional application, which is more suitable for gas and steam automatic drive components.

Hardware specifications and characteristics

The core hardware of IS420UCSBH3A controller includes a 1200 MHz EP80579 Intel microprocessor, which runs on QNX real-time operating system and has high reliability and real-time. The modular design of the controller is compact, and it supports various communication interfaces, such as onboard I/O network (IONet) interface, for high-speed data transmission with I/O modules. In addition, it is equipped with 256 MB SDRAM memory, which can meet the needs of complex industrial applications.

In appearance design, there are several LED indicators on the front panel of IS420UCSBH3A controller, which are used to display the state of the controller. For example:

Amber LED indicates that the internal component exceeds the recommended limit;

A steady green LED indicates that the controller is online and running application code;

Other LED indicators are used to display the recovery process status, power status, etc.

The modular design of the controller allows flexible configuration, and has the characteristics of fanless design and built-in power supply, so that it can run stably in harsh environment.

technical superiority

The main technical advantages of IS420UCSBH3A controller include:

High-performance processor: 1200 MHz EP80579 microprocessor is adopted to ensure high-speed data processing capability.

Real-time operating system: It runs on QNX operating system and provides high reliability and real-time.

Modular design: support rapid expansion and flexible configuration, and adapt to different industrial application scenarios.

Safety function: It conforms to ANSI/ISA-12.12.01-2015 or CAN/CSA-C22.2No. 213-15 standards and is suitable for dangerous areas.

Low power design: the power consumption is only 12 watts, which is suitable for industrial environments that need energy saving.

Application scenario

IS420UCSBH3A controller is widely used in power generation, petroleum, natural gas, metallurgy, chemical industry and other industries, mainly used for the control logic management of gas turbine or steam turbine. Its modular design and high performance enable it to handle complex industrial automation tasks efficiently.

summary

As a part of Mark VIe series, IS420UCSBH3A controller occupies an important position in the field of industrial automation with its high performance, modular design and powerful real-time control capability. Its extensive application scenarios and flexible configuration options make it an ideal choice for gas, steam and wind turbine control systems. At the same time, its safety and reliability also meet the strict requirements of industrial application.

The following are the controller models similar to IS420UCSBH3A in GE) Mark VIe series and their main features:

1. IS420UCSBH2A

Type: UCSB (Universal Control System Board)

Processor: 1200 MHz EP80579 Intel microprocessor.

Memory: 256 MB SDRAM

Features:

Similar to the hardware structure of IS420UCSBH3A.

Suitable for control of gas turbine and steam turbine.

Fan-less design, low power consumption (12W)

Front panel LED status indicator

Difference:

H2A is an earlier version, and H3A may optimize some hardware compatibility.

2. IS420UCSCG1A / IS420UCSCG2A

Type: UCSC (Universal Control System Controller)

Processor: the same series of EP80579 microprocessors.

Memory: 256 MB SDRAM

Features:

High software compatibility (similar to UCSB)

It is suitable for more complex redundant control systems.

Support IONet (onboard I/O network) communication.

Difference:

UCSC is usually used for Master Controller, while UCSB is mostly used for auxiliary control.

3. IS420ESWBH3A

Type: ESWB (Ethernet Switch Board)

Function:

Provide high-speed Ethernet communication support

Network expansion suitable for Mark VIe system

Difference:

Non-control core module, mainly used for network communication.

4. IS215ACLEH1B / IS215ACLEH2A

Type: ACLE (Auxiliary Control Logic Actuator)

Function:

Auxiliary control logic processing

Suitable for distributed I/O management.

Difference:

Non-main control unit, usually used with UCSB/UCSC.

5. IS200VSVOH1B

Type: VSVO (Turbine Valve Control Module)

Function:

Special for servo control of steam turbine valves

Difference:

Dedicated module, which does not undertake the main control task.