Hirschmann Media converter MM20-M4M4T1T1EAHH

 Interference immunity: EN 61000-6-2:2005 

 Emitted interference: EN 55022:2010 Warning! This is a class A device. This device can cause interference in living areas, and in this case the operator may be required to take appropriate measures. Note: The assembly guidelines provided in these instructions must be strictly adhered to in order to observe the EMC threshold values. 

 FCC note This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions : 

(1) This device may not cause harmful interference; 

(2) this device must accept any interference received, including interference that may cause undesired operation. Appropriate testing has established that this device fulfills the requirements of a class A digital device in line with part 15 of the FCC regulations. These requirements are designed to provide sufficient protection against interference when the device is being used in a business environment. The device creates and uses high frequencies and can also radiate high frequencies, and if it is not installed and used in accordance with this operating manual, it can cause radio transmission interference. The use of this device in a living area can also cause interference, and in this case the user is obliged to cover the costs of removing the interference. 

 Recycling note After usage, this product must be disposed of properly as electronic waste, in accordance with the current disposal regulations of your county, state and country. PowerMICE Release 01 04/2014 13 About this Manual The “Installation” user manual contains a device description, safety instructions, a description of the display, and the other information that you need to install the device. The following manuals are available as PDF files on the CD-ROM supplied: 

 Installation user manual 

 Basic Configuration user manual 

 Redundancy Configuration user manual 

 Router Configuration user manual 

 Graphical User Interface reference manual 

 Command Line Interface user manual The Industrial HiVision Network Management Software provides you with additional options for smooth configuration and monitoring: 

 Simultaneous configuration of multiple devices 

 Graphic interface with network layout 

 Auto-topology discovery 

 Event log 

 Event handling 

 Client/server structure 

 Browser interface 

 ActiveX control for SCADA integration 

 SNMP/OPC gateway.

Related models

MS4128-L3E ATEX

MS4128-L3P ATEX

MS4128-L2P EEC

MS4128-L3E EEC

MS4128-L3P EEC

MM2-4TX1

MM2-4TX1-EEC

MM2-4FXM3

MM2-2FXM3/2TX1

MM2-2FXM2

MM2-2FXS2

MM3-4TX5

MM3-1FXM2/3TX1

MM3-1FXM2/3TX1-EEC

MM3-2FXM2/2TX1

MM3-2FXM2/2TX1-EEC

MM3-2FXM4/TX1