KONGSBERG RAIV400 Remote Analogue Input, Voltage

The RAIV400 is an interface module between the Serial Process Bus and analogue input signals.

Typical applications are:

• Vessel Control Systems 

 • Process Control Systems 

 • Safety Systems

Features

• Up to 32 analogue voltage inputs 

 • Dual Serial Process Bus (SPBus) interfaces to allow optional redundancy 

 • Each SPBus interface ensures electrical isolation from the control system 

 • Easy installation and replacement:- DIN standard rail-mounting- plug-in connections 

 • Status LED for normal operation or error condition 

 • Loop-check and debugging from operator station and local data terminal The Kongsberg Maritime Remote Input and Output system (RIO400) uses a Serial Process Bus (SPBus) between a controller computer in the process network and the input and output (I/O) signals to remote devices such as valves, relays and temperature sensors. The RAIV400 is an interface module between the SPBus and analogue inputs from eld instruments and is primarily intended for use in dual I/O systems. The RIO400 system provides a cost-effective solution for connecting any number of inputs and outputs to a Kongsberg Maritime automation system, independent of the distance between the remote equipment and the controller computer.

 • Short-circuit proof loop current driver 

 • Dual watch-dogs 

 • Fail-safe settings activated by watchdog 

 • Built-in test (BIT) for self diagnostics and fault identication 

 • Dual units are SIL 3 compliant 

 • Single units are SIL 1 and SIL 2 compliant 

 • Line Fault Detection (LFD) 

 • Earth Fault Detection (EFD), node level

Description

The Kongsberg Maritime Remote Input and Output system (RIO400) uses a Serial Process Bus (SPBus) between a controller computer in the process network and the input and output (I/O) signals to remote devices such as valves, relays and temperature sensors. The RAIV400 is an interface module between the SPBus and analogue inputs from eld instruments and is primarily intended for use in dual I/O systems. The RIO400 system provides a cost-effective solution for connecting any number of inputs and outputs to a Kongsberg Maritime automation system, independent of the distance between the remote equipment and the controller computer.

RAIV400 600370 Remote Analogue Input

Voltage

24Vdc, max 0.9A power consumption. Heat dissipation10W

RDIO420S 316564 Remote Digital Input Output 24Vdc, max 0.9A power consumption. Heat dissipation10W

RMP420 306712 Remote Multipurpose I/O 24Vdc, 10W, Loop current max 1A per channel

RMP420S 319824 RMP420S (S version) 24Vdc, 10W, Loop current max 1A per channel

RMP422 388820 Remote Multipurpose I/O 24Vdc, 10W, Loop current max 1A per channel

RMP422S 363350 RMP422S (S version) 24Vdc, 10W, Loop current max 1A per channel

RCU502 330924 Remote Control Unit 24Vdc, 20W power consumption, 20W heat dissipation