VM600Mk2 MPC4Mk2 + IOC4Mk2 machinery protection modules vibro-meter

VM 600 MK 2 - mpc4mk 2 - ioc4mk 2 - виброметр

Вибраметр VM600Mk2 MPC4Mk2 + IOC4Mk2 Модуль механической защиты

KEY FEATURES AND BENEFITS

• VibroSight ® compatible hardware from the vibro-meter ® product line 

 • VM600Mk2 (second generation) machinery protection modules 

 • 4 dynamic channels and 2 auxiliary channels configurable as either tachometer inputs or DC inputs 

 • VM600Mk2 system safety-line to drive all system relays to a safe state 

 • Diagnostics (built-in self-test (BIST)) provides continuous feedback on the health of the modules 

 • Individually configurable inputs (with sensor power supply outputs), channel filters, processing and outputs – with simultaneous data acquisition (fixed frequency or order tracked) 

 • Up to 10 processed outputs per channel 

 • Multiple alarms per processed output with configurable limits, hysteresis and time delay 

 • AND, OR and majority voting logic functions for the combination of alarm and status information

KEY BENEFITS AND FEATURES (continued)

 • Discrete outputs: 4 user-configurable relays for use by alarms and 1 common circuit-fault relay 

 • Analog outputs: 4 outputs configurable as either 4 to 20 mA or 0 to 10 V 

 • Conforms to API 670 

 • Direct system Ethernet communications 

 • Compatible with VM600Mk2 system racks (ABE04x) and slimline racks (ABE056)

KEY BENEFITS AND FEATURES (continued)

 • Live insertion and removal of modules (hot-swappable) 

 • Software configurable

APPLICATIONS

• VM600Mk2 machinery protection (Q1 2021) 

 • VM600Mk2 machinery protection and/or condition monitoring (Q3 2021) 

 • Vibration and/or combustion monitoring 

 • API 670 applications

Introduction

The VM600Mk2 MPC4Mk2 + IOC4Mk2 machinery protection modules are designed for operation with the second generation of VM600Mk2 rack based machinery protection system (MPS), from Meggitt’s vibro-meter ® product line. The MPC4Mk2  + IOC4Mk2 are second generation modules (cards) that provide 4 dynamic and 2 auxiliary channels of machinery protection and basic condition monitoring in VM600Mk2 systems.

VM600Mk2 rack-based monitoring systems

The vibro-meter ® VM600Mk2 rack-based monitoring system is the evolution of Meggitt’s solution for the protection and monitoring of rotating machinery used in the power generation and oil & gas industries. VM600Mk2 solutions are recommended when a centralised monitoring system with a medium to large number of measurement points (channels) is required. It is typically used for the monitoring and/or protection of larger machinery such as gas, steam and hydro turbines, and generators, smaller machines such as compressors, fans, motors, pumps and propellers, as well as balance of-plant (BOP) equipment. A VM600Mk2 system consists of a 19" rack, a rack power supply and one or more monitoring modules. Optionally, relay modules and rack controller and communications interface modules can also be included. Two types of rack are available: a VM600Mk2 system rack (ABE04x, 6U) that can house up to twelve monitoring modules, and a VM600Mk2 slimline rack (ABE056, 1U) that can house one monitoring module. The racks are typically mounted in standard 19" rack cabinets or enclosures installed in an equipment room. Different VM600Mk2 monitoring modules are available for machinery protection, condition monitoring and/or combustion monitoring applications. For example, machinery protection modules such as the MPC4Mk2 + IOC4Mk2 modules, and condition monitoring modules such as the XMV16 + XIO16T monitoring modules for vibration and XMC16 + XIO16T monitoring modules for combustion. The RLC16Mk2 relay module is an optional module used to provide additional relays when the four user-configurable relays per set of MPC4Mk2 + IOC4Mk2 modules is not sufficient for an application. The CPUx  +  IOCx rack controller and communications interface modules (CPUM / IOCN and CPUMk2 + IOCMk2) are optional modules used to provide additional VM600Mk2 system functionality such as configuration management, “hot-swapping” with automatic reconfiguration (to be implemented for VM600Mk2), front-panel display, CPUx  +  IOCx modules redundancy, fieldbus data processing, front-panel alarm reset (AR) button, MPS rack (CPUx) security, system event and measurement event logging, fieldbus communications (Modbus, PROFIBUS and/or PROFINET) and/or communications redundancy. Note: Different versions of CPUx  +  IOCx rack controller and communications interface modules support different combinations of VM600Mk2 system functionality. VM600Mk2 systems are compatible with CPUMk2 + IOC Mk2 modules. VM600Mk2 rack-based monitoring systems complement the VibroSmart ® distributed monitoring systems that are also available from Meggitt’s vibro-meter ® product line, and are compatible with the same VibroSight ® machinery monitoring software suite.

MPC4Mk2 +  IOC4Mk2 machinery protection modules and VM600 racks