KONG -Y
NameDescriptionContent
Location:

Woodward easYgen-1400 Technical Manual Genset Control

From:Woodward | Author:kongjiang | Time :2026-03-06 | 808 Browse: | 🔊 Click to read aloud ❚❚ ▶ | Share:

easYgen-1400

Technical Manual

Genset Control

Copyright And Disclaimer

Disclaimer

All information and instructions in this manual have been provided under due

consideration of applicable guidelines and regulations, the current and known state of the

art, as well as our many years of in-house experience. Woodward assumes no liability for

any damages due to:

• Failure to comply with the instructions in this manual

• Improper use / misuse

• Willful operation by non-authorized persons

• Unauthorized conversions or non-approved technical modifications

• Use of non-approved spare parts

The originator is solely liable for the full extent for damages caused by such conduct. The

obligations agreed-upon in the delivery contract, the general terms and conditions, the

manufacturer’s delivery conditions, and the statutory regulations valid at the time the

contract was concluded, apply.

Copyright

This manual is protected by copyright. No part of this manual may be reproduced in any

form or incorporated into any information retrieval system without written permission of

Woodward GmbH.

Delivery of this manual to third parties, duplication in any form - including excerpts - as

well as exploitation and/or communication of the content, are not permitted without a

written declaration of release by Woodward GmbH

Actions to the contrary will entitle us to claim compensation for damages. We expressly

reserve the right to raise any further accessory claims.

1.3

Service And Warranty

Opening the device will nullify any warranty!

Any such unauthorized modifications

• constitute "misuse" and/or "negligence" as per the product warranty

• thereby exclude warranty coverage for any resulting damage, and

• invalidate product certifications or listings.

Our Customer Service is available for technical information. Please see page 2 for contact

details.

In addition, our employees are interested in any new information and experiences that

arise from usage and could be valuable for improving our products.

1.4

1.4.1

Safety

Intended Use

The easYgen unit has been designed and constructed solely for the intended use

described in this manual.

• Intended use requires operation of the control unit within the range outlined in the

specifications listed in ╚═▷ “8 Technical Specifications”.

• Steps to be taken for commissioning are outlined in ╚═▷ “6 Commissioning”.

• Intended use includes compliance with all instructions and safety notes presented in

this manual.

• Any use which exceeds or differs from the intended use shall be considered improper

use.

• No claims for any kind for damage will be considered if such claims result from

improper use.

1.4.2 Personnel

This manual specifies the personnel qualifications required for the different areas of work,

listed below:

•Well trained for electrical installations. •

•Aware of the local safety regulations. •

•Experienced in working with electronic measuring and control devices. •

•Allowed to manage the controlled (engine/generator) system. •

The workforce must only consist of persons who can be expected to carry out their work

reliably. Persons with impaired reactions due to, for example, the consumption of drugs,

alcohol, or medication are prohibited.

When selecting personnel, the age-related and occupation-related regulations governing

the operating location must be observed.

2

System Overview

General notes

The easYgen is a stand-alone genset controller with measuring, monitoring, and breaker

control functionality. It comes with an easily mountable plastic housing covering a

thoroughly tested electronic-electrical system.

Display and buttons of the HMI offer access to states and values, as well as access to the

application. Password protection enables the assignment of multiple operation access

levels. Remote access, monitoring, visualization, and configuration are possible via

integrated interfaces. Communication between easYgens using PLC control or as a

network member offers an enhanced system management range; additionally supported

by easy to implement accessories

2.1

Display and Status Indicators

General Notes

HMI and the configuration software enable access to control, settings, and visualization.

The front panel offers a number of functionally defined buttons and a set of menu

management buttons. LEDs visualize fixed states, the graphic display works together with

the menu management buttons to show all necessary information

Features and Functions of both easYgen-400 and -1400

Both, easYgen-400 and easYgen-1400. are very similar in hardware and software. The

easYgen-1400 is the device with the higher functionality. For purposes of comparison and

better differentiation, both are described below.

easYgen-400 is intended to be used for single automation systems, auto start/stop of

the unit is performed using a remote signal.

easYgen-1400 has all the functions of the easYgen-400 as well as automatic mains

failure function (AMF), which is particularly well-suited for single automation systems that

include mains and generator

Key characteristics

• With ARM-based 32-bit SCM, highly integrated hardware, high reliability level.

• Multilingual interface (English, Chinese, Spanish, Russian, Portuguese, Turkish,

  • Beckhoff FC9002 | Ethernet card, 2 channels, PCI
  • Beckhoff FC7502 | Sercos II master card, 2 channels, PCI™
  • Beckhoff FC7501 | Sercos II master card, 1 channel, PCI™
  • Beckhoff FC5322 | CAN FD card, 2 channels, PCIe® x1
  • Beckhoff FC5321 | CAN FD card, 1 channel, PCIe® x1
  • Beckhoff FC5202 | DeviceNet®, master/slave card, 2 channels, PCI™
  • Beckhoff FC5201 | DeviceNet® master/slave card, 1 channel, PCI™
  • Beckhoff FC5122 | CANopen master/slave card, 2 channels, PCIe® x1
  • Beckhoff FC5121 | CANopen master/slave card, 1 channel, PCIe® x1
  • Beckhoff FC5102 | CANopen master/slave card, 2 channels, PCI™
  • Beckhoff FC5101 | CANopen master/slave card, 1 channel, PCI™
  • Beckhoff FC3122 | PROFIBUS master/slave card, 2 channels, PCIe® x1
  • Beckhoff FC3121 | PROFIBUS master/slave card, 1 channel, PCIe® x1
  • Beckhoff FC3102 | PROFIBUS master/slave card, 2 channels, PCI™
  • Beckhoff FC3101 | PROFIBUS master/slave card, 1 channel, PCI™
  • Beckhoff FC1428 | EtherCAT G master card, 8 channels, PCIe® x4
  • Beckhoff FC1121 | EtherCAT slave card, 1 channel, PCIe® x1
  • Beckhoff FC1100 | EtherCAT slave card, 1 channel, PCI™
  • Beckhoff FC1028 | EtherCAT master card, 16 channels, PCIe® x4
  • Beckhoff FC9062 | Gigabit Ethernet PCIe® module, 2-channel
  • Beckhoff C9900-R266 | NOVRAM PCIe® module
  • Beckhoff FC3161 | PROFIBUS master/slave PCIe® module, 1 channel
  • Beckhoff C9900-E301 | RS232 PCIe® module, 2 channels
  • Beckhoff C9900-E277 | USB 3.0 PCIe® module, 2 channels
  • Beckhoff C9900-E276 | PCIe® module for CP-Link 4 – The Two Cable Display Link
  • Beckhoff C9900-E271 | USB Extender 2.0 Tx PCIe® module, 1 channel
  • Beckhoff CU8803-000x | Transmitter box for CP-Link 4 – The One Cable Display Link
  • Beckhoff CU8802-000x | Transmitter box for CP-Link-4 – The Two Cable Display Link
  • Beckhoff CU8851 | USB extension, USB Extended 2.0 receiver box
  • Beckhoff CU8801-0000 | USB extension, USB Extended 2.0 transmitter box
  • Beckhoff CU8880-0010 | Ethernet controller with USB input
  • Beckhoff CU8871 | USB CFast slot
  • Beckhoff CU8870 | USB CompactFlash® slot
  • Beckhoff CU8815 | DVI splitter
  • Beckhoff CU8810-0010 | DVI splitter with USB extender
  • Beckhoff CU8006 | 4-port USB 3.0 hub
  • Beckhoff C9900-U332-0010 | Battery pack
  • Beckhoff C9900-U330 | Battery pack
  • Beckhoff C6670-0010 | Control cabinet industrial server
  • Beckhoff C6670-0020 | Control cabinet industrial server
  • Beckhoff C6240-0070 | Control cabinet Industrial PC
  • Beckhoff C6240-0080 | Control cabinet Industrial PC
  • Beckhoff C6675-0060 | Control cabinet Industrial PC
  • Beckhoff C6675-0070 | Control cabinet Industrial PC
  • Beckhoff C6650-0050 | Control cabinet Industrial PC
  • Beckhoff C6650-0070 | Control cabinet Industrial PC
  • Beckhoff C6640-0060 | Control cabinet Industrial PC
  • Beckhoff C6640-0070 | Control cabinet Industrial PC
  • Beckhoff C5210-0030 | 19-inch slide-in Industrial PC
  • Beckhoff C5210-0040 | 19-inch slide-in Industrial PC
  • Beckhoff C5210-0050 | 19-inch slide-in Industrial PC
  • Beckhoff C5240-0010 | 19-inch slide-in Industrial PC
  • Beckhoff C5240-0030 | 19-inch slide-in Industrial PC
  • Beckhoff C7015-0020 | Ultra-compact Industrial PC in IP65
  • Beckhoff C7015-0020 | Ultra-compact Industrial PC in IP65
  • Beckhoff C7015-0030 | Ultra-compact Industrial PC in IP65
  • Beckhoff C6525-0060 | Fanless built-in Industrial PC
  • Beckhoff C6525-0070 | Fanless built-in Industrial PC
  • Beckhoff C6525-0080 | Fanless built-in Industrial PC
  • Beckhoff C6515-0060 | Fanless built-in Industrial PC
  • Beckhoff C6515-0070 | Fanless built-in Industrial PC
  • Beckhoff C6515-0080 | Fanless built-in Industrial PC
  • Beckhoff C6043-0090 | Ultra-compact Industrial PC with NVIDIA® GPU
  • Beckhoff C6040-0090 | Ultra-compact Industrial PC
  • Beckhoff C6032-0060 | Ultra-compact Industrial PC
  • Beckhoff C6032-0070 | Ultra-compact Industrial PC
  • Beckhoff C6032-0080 | Ultra-compact Industrial PC
  • Beckhoff C6030-0070 | Ultra-compact Industrial PC
  • Beckhoff C6030-0080 | Ultra-compact Industrial PC
  • Beckhoff C6027-0000 | Fanless ultra-compact Industrial PC
  • Beckhoff C6027-0010 | Fanless ultra-compact Industrial PC
  • Beckhoff C6025-0000 | Fanless ultra-compact Industrial PC
  • Beckhoff C6025-0010 | Fanless ultra-compact Industrial PC
  • Beckhoff C6025-0020 | Fanless ultra-compact Industrial PC
  • Beckhoff C6930-0060 | Control cabinet Industrial PC
  • Beckhoff C6930-0070 | Control cabinet Industrial PC
  • Beckhoff C6930-0080 | Control cabinet Industrial PC
  • Beckhoff C6925-0030 | Fanless control cabinet Industrial PC
  • Beckhoff C6925-0040 | Fanless control cabinet Industrial PC
  • Beckhoff C6915-0010 | Fanless control cabinet Industrial PC
  • Beckhoff C6915-0020 | Fanless control cabinet Industrial PC
  • Beckhoff C6905-0010 | Economy control cabinet Industrial PC
  • Beckhoff C6905-0020 Economy control cabinet Industrial PC
  • Beckhoff C6905-0030 Economy control cabinet Industrial PC
  • Eaton SPN6084LEAXX2F Power Defense SB
  • Eaton MPNC4N3LEAXXSW Magnum low voltage power circuit breaker
  • EatonSP N8403YEAXX2H Power Defense SB
  • Eaton MPS8604WEAXX2C Magnum low voltage power circuit breaker
  • Eaton MPS8404WEAXXSW Magnum low voltage power circuit breaker
  • Eaton MPN6504LEAXX3A
  • Eaton MPSC323VEAXX2A Magnum low voltage power circuit breaker
  • Eaton SPS6304WEAXX2F Power Defense SB
  • Eaton MPN6504LEAXX2H Magnum low voltage power circuit breaker
  • Eaton MPSC504HEAXX2H Magnum low voltage power circuit breake
  • Eaton SPN85N3LEAXX2F Power Defense SB
  • Eaton SPN6403CEAXX2F Power Defense SB
  • Eaton MPSC5N4MEAXX3A Power Defense SB
  • Eaton SPSC124WEAXX2A Power Defense SB
  • Eaton SPS85A4WEAXX2H Power Defense SB
  • Eaton SPSC5N4MEAXX2A Power Defense SB
  • Eaton MPN8403VEAXX2H Magnum low voltage power circuit breaker
  • NZMB2-4-A200 MCCB NZM, NZM2 TM and Elec
  • Eaton NZMN1-A63 Series NZM complete molded case circuit breaker
  • Eaton NZMB1-S26-CNA Series NZM complete molded case circuit breaker
  • Eaton NZMH2-A25-NA Series NZM complete molded case circuit breaker
  • NZMH2-A200-BT-NA Eaton Series NZM complete molded case circuit breaker
  • NZMN4-VEF1200-NA Eaton Series NZM complete molded case circuit breaker
  • NZMH2-AF250-NA MCCB NZM, NZM2 TM and Elec
  • NZMB1-AF60-NA Eaton Series NZM complete molded case circuit breaker
  • NZMN1-A50 Eaton Series NZM complete molded case circuit breaker
  • NZMH2-A80-NA Eaton Series NZM complete molded case circuit breaker
  • Eaton Cutler-Hammer HFD3030 6639C86G87 3 Pole 30A 600V Circuit Breaker
  • Moeller XV-230-57CNN-1-13-1 HMI PLC Panel Touchscreen 5.7"
  • EATON CEAG CU CG-S , 40071360300 Control Unit
  • EATON SDN90186 MOTOR CONTROL CENTER
  • EATON HMCP150U4 CIRCUIT BREAKER
  • Eaton 7801C57 Digitrip Optimizer Hand Held Programmer
  • Eaton HMCP400R5 Circuit Breaker
  • EATON MP-3000 SAFETY RELAY 66D2032GX1
  • EATON PGGLOBL1701DPRO 1785T Touch Panel
  • Eaton, Moeller, Easy MFD-CP8-NT
  • Eaton WL-35717F Vacuum Interrupter
  • EATON VICKERS EEA-PAM-535-A-32 AMPLIFIER CARD
  • EATON FP5000-00 / FP5200-00 66D2041G11 FEEDER PROTECTION RELAY
  • Eaton IQ-504 120VAC Modular Overload Relay
  • Beckhoff CX5620-0225    CPU module
  • Beckhoff CX5620-0220    CPU module
  • Beckhoff CX5620-0215    CPU module, Beckhoff RT Linux®