ABB AX410, AX411, AX416, AX450 and AX455 Single and dual input analyzers

Analog

Current output control (0 to 100 %)

Time proportioning cycle time

1.0 to 300.0 s, programmable in increments of 0.1 s

Pulse frequency

1 to 120 pulses per minute, programmable in increments

of 1 pulse per minute

Controller action

Direct or reverse

Proportional band

0.1 to 999.9 %, programmable in increments of 0.1 %

Integral action time (Integral reset)

1 to 7200 s, programmable in increments of 1 s (0 = Off)

Derivative

0.1 to 999.9 s in increments of 0.1 s – only available for

single set point control

Auto / Manual

User-programmable

…Specification

Access to functions

Direct keypad access

• Measurement, maintenance, configuration,

diagnostics or service functions

• Performed without external equipment

or internal jumpers

Sensor cleaning function – AX416 only

Configurable cleaning action relay contact

• Continuous

• Pulse in 1 s on and off times

Frequency

5 minutes to 24 hours, programmable in 15 minute

increments up to 1 hour then in 1 hour increments

for 1 to 24 hours

Duration

15 s to 10 minutes, programmable in 15 s increments up to

1 minute then in 1 minute increments up to 10 minutes

Recovery period

30 s to 5 minutes, programmable in 30 s increments

Mechanical data

Wall- / Pipe-mount versions

• IP65 (not evaluated under UL certification)

• Dimensions 192 mm high x 230 mm wide x 94 mm deep

(7.56 in. high x 9.06 in. wide x 3.7 in. deep)

• Weight 1 kg (2.2 lb.)

Panel-mount versions

• IP65 (front only)

• Dimensions 96 mm x 96 mm x 162 mm deep

(3.78 in. x 3.78 in. x 6.38 in. deep)

• Weight 0.6 kg (1.32 lb.)

Cable entry types

Standard

5 or 7 x M20 cable glands

North American 7 x knockouts suitable

for 1/2 in. Hubble gland

Power supply

Voltage requirements

• 100 to 240 V AC, 50 / 60 Hz (90 V min. to 264 V max. AC)

• 12 to 30 V DC

Power consumption

10 W

Insulation

Mains to earth (line to ground) 2 kV RMS

Environmental data

Operating temperature limits–20 to 55 °C (–4 to 131 °F)

Storage temperature limits–25 to 75 °C (–13 to 167 °F)

Operating humidity limits

Up to 95 %RH non condensing

EMC

Emissions and immunity

Meets requirements of:

• EN61326 (for an industrial environment)

• EN50081-2

• EN50082-2

Approvals, certification and safety

Safety approval

UL

CE mark

Covers EMC & LV Directives

(including latest version EN 61010)

General safety

• EN61010-1

• Overvoltage Class II on inputs and outputs

• Pollution category 2

Languages

Languages configurable:

• English

• French

• German

• Italian

• Spanish